Tophoven Royal Eagle
Available with integrated HEATING and LIGHTING.
Robust aluminium frame, with patented fittings that allow easy interchange and replacement of component parts.
Canvases available in a number of different fabrics and in a huge array of colours.
Printing available - with NO MINIMUM ORDER
We have a range of sizes available in stock for immediate delivery.
|
|
|
|
|
Available Sizes
| Size |
Shape |
Pole
diameter |
Features
|
Opening |
|
| 3.0m |
Square |
70mm |
Telescopic |
Winder |
| 3.5m |
Square |
70mm |
Telescopic |
Winder |
| 4.0m |
Square |
70mm |
Telescopic |
Winder |
| 4.5m |
Square |
70mm |
Telescopic |
Winder |
| 5.0m |
Square |
70mm |
Telescopic |
Winder |
| |
|
|
|
|
| 3.5m |
Octagonal |
70mm |
Telescopic |
Winder |
| 4.0m |
Octagonal |
70mm |
Telescopic |
Winder |
| 4.5m |
Octagonal |
70mm |
Telescopic |
Winder |
| 5.0m |
Octagonal |
70mm |
Telescopic |
Winder |
| 6.0m |
Octagonal |
70mm |
Telescopic |
Winder |
| |
|
|
|
|
| 3.0x4.0m |
Rectangle |
70mm |
Telescopic |
Winder |
| 3.0x5.0m |
Rectangle |
70mm |
Telescopic |
Winder |
| 4.0x5.0m |
Rectangle |
70mm |
Telescopic |
Winder |
The main poles are profiled aluminium and immensely strong.
Telescopic closing is a mechanism that allows the parasol to close upwards, so increasing the closed clearance of the parasol. For full detail please download the specification sheet below.
Although we find winder systems as standard there are other lower cost options available.
If any of the above details are unclear or you would rather speak to a representative to discuss what might suit your requirements best, please click here .
Heat and light options
To maximise the amount of time that these parasols are used it is possible to fit Infra-red electrical heating and lighting systems to the underside of the canopy.
Lighting is centrally mounted on the pole, utilising 4 low wattage light units
Heating is provided by a number of infra-red electrical heater units. It is possible to put in a total of 4 heater units in to the XXL parasols, enough to heat the whole area. Heaters are available with a number of different power ratings, from 1.3kW to 2.0kW.
All electrics are fitted at time of manufacture, installed within the frame of the parasol and need to be specified at the same time that the parasol is ordered.
Click here for further information about the integrated heating and lighting
Other options available include
Guttering to connect parasols together. these can be customised to ensure that the rain water runs off in a particular direction.
Side sheets to enclose the parasol and protect the occupants from the weather
Cover bags to protect the parasol and particularly the fabric when not in use.
Printing
Printing can be carried out using a number of different processes. To see which will produce the best results for you we suggest that you send us your artwork and we can offer suggestions.
Screen print, for simple flat colour prints (or limited half tones). Base fabric colour needs to be selected from our standard fabric ranges. (much better on Dickson Orchestra)
Digital print, for small numbers of more complex printing. Base fabric white only.
Dispersion printing, for larger numbers of complex print and all over printing. Base fabric colour white.
Go back to Product page
Frame Construction
Aluminium frame with profiled 70mm pole with 3mm wall thickness. Ribs in aluminium of 32mm x 19mm or 43mm x 19mm
Telescopic closing system that enables the parasol to close upwards, in many cases this allows all but the largest models to still close over the height of a standard table.
Frames as standard are produced in a white powder coat finish. They are also available in an anodised aluminium finish at a small additional cost. For special projects other powder coat options are available.
We fit a winder system as the standard closing and opening mechanism as this is by far the easiest method of operation for the parasol.
Other, lower cost systems available are either a slider system or a clamp system. Neither of these systems are as easy to operate as the winder and both leave exposed components that can become subject to tampering.
All connecting parts are manufactured from fibreglass reinforced plastic. Royal Eagle parasols are fitted with patented connectors to enable easy interchange and replacement of component parts.
Canopy Fabric
Canopies manufactured from either Airtex, or the recommended Dickson Orchestra fabric. Dickson fabrics are far superior for printed parasols.
All Royal Eagle parasols are fitted with air vents as standard, this helps assist with stability and wind resistance.
To view fabrics please download the fabric swatches from the links below.
Airtex fabric swatch
New 2008 Dickson Orchestra fabric swatch
Further Information
Our brochure page featuring the Royal Eagle parasol can be downloaded by clicking on the link below
Brochure page for Royal Eagle
For a Royal Eagle datasheet click on the link below
Royal Eagle datasheet
Manufacturers Brochure
Royal Eagle
For Royal Eagle instructions
Royal Eagle Instructions
Go back to Product page
|